THOMPSON & FORMBY INC -- FORMBY'S FURNITURE REFINISHER  -- 8010-00N033122
<pre>=====================  Product Identification  =====================

Product ID:FORMBY'S FURNITURE REFINISHER
MSDS Date:10/29/1986
FSC:8010
NIIN:00N033122
=== Responsible Party ===
Company Name:THOMPSON & FORMBY INC
Address:10136 MAGNOLIA DR
City:OLIVE BRANCH
State:MS
ZIP:38654
Country:US
Info Phone Num:601-895-5594
Emergency Phone Num:901-685-7555
CAGE:THOMP
=== Contractor Identification ===
Company Name:THOMPSON & FORMBY INC.
Address:10136 MAGNOLIA DRIVE
City:OLIVE BRANCH
State:MS
ZIP:38654
Country:US
Phone:901-685-7555 OR 714-864-2310
CAGE:THOMP

=============  Composition/Information on Ingredients  =============

Ingred Name:METHANOL
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: <20%
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHANE, DICHLORO-; (METHYLENE CHLORIDE)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: <30%
OSHA PEL:500 PPM, 1000, C
ACGIH TLV:50 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <20%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: >5%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ISOPROPYL ALCOHOL; (2-PROPANOL) (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: >5%
OSHA PEL:400 PPM;500 PPM STEL
ACGIH TLV:400 PPM;500 PPM STEL

Ingred Name:SUPP DATA:IN AREAS W/POOR VENTILATION.
RTECS #:9999999ZZ

Ingred Name:EFTS OF OVEREXP:& SAFE HANDLING & EXPOSURE RECOMMENDATIONS
    .
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50:(ORAL) 3.8
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE SEV IRRIT. SKIN:
    PRLNGD/RPTD CONT CAN CAUSE MOD DERM. INHAL: EXCESSIVE INHAL OF VAPS
    CAN CAUSE RESP & NASAL IRRIT, DIZZ, FATIGUE, HDCH, EVEN ASPHY.
    INGEST:CAN CAUSE GI IRRIT. CHLOROCAR BON MATLS HAVE PRDCED SENSIT
    OF MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & COULD HAVE SIMILAR
    EFT IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:METHYLENE CHLORIDE: ANTICIPATED
    CARCINOGEN (NTP); GROUP 2B (IARC)
Effects of Overexposure:HLTH HAZ:HUMANS. ADRENOMIMETICS (E.G.
    EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES
    IN HUMANS ACUTELY/CHRONICALLY EXPOSED TO CHLOROCARBONS . TOLUENE
    108-88- 3 APPEARS ON NA VY LISTING OF OCCUP REPROD HAZ. SEEK
    CONSULTATION FROM APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ
    LIST INFO (ING 7)
Medical Cond Aggravated by Exposure:PERSONS W/KNOWN RESPIRATORY OR
    HEART AILMENTS SHOULD EXERCISE EXTREME CAUTION WHEN USING THIS
    PRODUCT. CONSULT MD BEFORE USING.

=======================  First Aid Measures  =======================

First Aid:INHAL:DO NOT GIVE STIMULANTS. REMOVE INDIVIDUAL TO FRESH AIR.
    IF NECESSARY ADMINISTER OXYGEN. GET MEDICAL ATTENTION. SKIN:WASH
    THE AREA THOROUGHLY. EYES:FLUSH W/WATER FOR AT LEAST 15 MINS & GIVE
    MEDIC AL ATTENTION. INGEST:INDUCE VOMITING. KEEP PERSON WARM. GET
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:19F,-7.2C
Lower Limits:1.3%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR WATER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
    & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPS ARE HVR THAN AIR & MAY TRAVEL ALONG
    GROUND OR BE MOVED BY VENT & IGNITED BY HEAT, PILOT LIGHTS, OTHER
    FLAMES & IGNIT SOURCES AT LOCATIONS DISTANT (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL:ABSORB LIQUID ON PAPER OR FLOOR
    ABSORBENT MATERIALS & REMOVE TO WELL VENTILATED AREA AWAY FROM
    FLAMES & HEATED SURFACES. LARGE:ELIMINATE ALL IGNITION SOURCES.
    DIKE AREA OF SPILL. ABSORB ON SAND,  CLAY OR OTHER ABSORBENT
    MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT IN COOL
    AREA. REMOVE ALL IGNIT SOURCES FROM EMPTIED CONTRS WHICH RETAIN
    PROD (VAP/LIQ/ RESIDUE). OBSERVE ALL HAZ PREC.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. PERS HAVING/SUSPECTED
    OF HAVING HEART/RESP PROBLEMS SHOULD CONSULT MD BEFORE USING PROD.
    NO SMKNG IN AREA OF USE. DO NOT USE IN GEN VICINITY OF ARC
    WELDING/OPEN FLAMES/H OT SURF. HEAT/UV RADIA MAY (SUPP DATA)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
    SCBA.
Ventilation:CONTROL AIRBORNE CONC BELOW TLV EXPOS GUIDELINES. USE ONLY
    W/ ADEQ VENT (SAME AS OUTDOORS). LOC EXHST VENT MAY (SUP DAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGGS/FULL LENGTH FSHLD 
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
    CONTACT WEAR IMPERVIOUS CLOTHING & FOOTWEAR.
Work Hygienic Practices:WASH CONTAMINATED SKIN & CLOTHING IN SOAP &
    WATER. FLUSH EYES W/WATER.
Supplemental Safety and Health
EXPLO HAZ:FROM MATL HNDLNG POINT. THIS PROD IS EXTREMELY FLAMM EXERCISE
    EXTREME CARE IN HNDLNG. THERMAL DECOMPOSITION PRODUCTS MAY INCLUDE
    HCL & PHOSGENE . OTHER PREC:CAUSE THE FORMATION OF HCL  &/OR
    PHOSGENE . PVNT PRLNGD SKIN CONT & BRTHG OF VAPS. VENT:BE NEC FOR
    SOME OPERATIONS. HAZ CONC MAY EXIST (ING 6)

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:>104F,>40C
Vapor Pres:346
Vapor Density:HVR/AIR
Spec Gravity:0.9013 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER (ETHYL ETHER=1)
Appearance and Odor:WATER CLEAR LIQUID W/ORGANIC ODOR.
Percent Volatiles by Volume:100 WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:CONTACT W/HEAT, SPARKS, FLAMES, HEATED
    SURFACE OR OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO2, CO, HCL & PHOSGENE MAY FORM UNDER
    COMBUSTION CONDITIONS OR AT HIGH TEMPERATURES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SMALL SPILLS OF <1 PINT:MOP, WIPE OR SOAK UP
    IMMED. REMOVE TO OUTDOORS. ALLOW VOLATILE PORTION TO EVAPORATE.
    LARGE SPILLS:DESTROY BY LIQUID INCINERATION. MATERIAL COLLECTED ON
    ABSORBENT MATERIAL MAY B E DEPOSITED I/A/W LOCAL, STATE & FED
    ENVIRON REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.